6축 Spierings SK1265-AT6 eLift 는 세계에서 가장 큰 이동식 타워크레인으로 이미 250회 이상 제작되었습니다. 강력한 엔진과 고성능 기압식 브레이크 시스템을 갖추었으며 운행 시야가 충분히 확보되어 건설 현장과 일반 도로에서의 안전성이 뛰어납니다. SK1265-AT6는 확장 가능한 5번째 지브 섹션을 최초로 장착한 Spierings 크레인으로, 4개의 나머지 지브 섹션과 조합하여 독보적으로 넓은 60m 반경을 제공합니다.
- 최대 하중10,000kg(최대 13.2m)
- 팁 하중1700 kg
- 최대 반경60 m
- 인양 높이35 m
- 타워 높이37,2 m
- 최대 인양 높이64.2m(30° 러프 지브)
Full electric & hybrid mode
The Zero-Emission eLift system has two operating modes; electrical mode and hybrid mode. Both modes have an efficient first line energy source, which can be chosen for the grid connection or diesel engine. The PowerPack® battery technology absorps the peaks in energy usage and will be charged when energy is unused. By using the electric mode you operate the crane 100% emission free on a silent sound level without any limitations in usage.
To operate the crane in electric mode it needs to be connected to a 32A grid connection that’s quite often available at most job sites. The system is using between 11A and 25A which can be pre-set at the display, so there is still energy left for other purposes.
A small 55kW 3-cylinder diesel engine with the newest Stage V emission certification is the main energy source during hybrid mode. The unused energy of the diesel engine is used to recharge the battery of the PowerPack®, so it can be used for peak absorption.
16a or 32a grid connection
Operate the SK597-AT4 eLift or SK1265-AT6 eLift full electric by a grid connection between 11A and 32A which can be pre-set at the display, so there still can be energy left for other equipment on site.
PowerPack® battery technology
The PowerPack® battery technology absorbs the peaks in energy usage and will be charged when energy requirement for the crane is low.
Free of noise & emission
Operate the eLift crane completely free of noise while operating in ‘electric mode’. Especially during city jobs and night jobs it’s a great advantage to work noise- and emission free.
One job, one man
Setup in 11 minutes