SK597-AT4 eLift
SK597-AT4 eLift 는 Spierings의 4세대 수압식 4축 이동식 타워크레인입니다. SK597-AT4의 4단계 지브는 길이가 소형 차량 정도이며 작업 반경은 48m입니다. 최고 인양 높이는 수평 위치에서 27.8m(지브 포함)이고 45도 상향각에서 58.1m(지브 포함)입니다.
SK597-AT4 eLift 는 최신 크레인 기술을 집약한 제품입니다. 이 크레인은 밸러스트 블록을 추가로 사용하지 않고도 최대 7,000kg의 하중을 인양할 수 있습니다.
사양
- 최대 하중7,000kg(최대 14.1 m)
- 팁 하중1700 kg
- 최대 반경48 m
- 인양 높이27,8 m
- 타워 높이29,7 m
- 최대 인양 높이58.1m(45° 러프 지브)
Full electric & hybrid mode
The Zero-Emission eLift system has two operating modes; electrical mode and hybrid mode. Both modes have an efficient first line energy source, which can be chosen for the grid connection or diesel engine. The PowerPack® battery technology absorps the peaks in energy usage and will be charged when energy is unused. By using the electric mode you operate the crane 100% emission free on a silent sound level without any limitations in usage.
To operate the crane in electric mode it needs to be connected to a 32A grid connection that’s quite often available at most job sites. The system is using between 11A and 25A which can be pre-set at the display, so there is still energy left for other purposes.
A small 55kW 3-cylinder diesel engine with the newest Stage V emission certification is the main energy source during hybrid mode. The unused energy of the diesel engine is used to recharge the battery of the PowerPack®, so it can be used for peak absorption.
16a or 32a grid connection
Operate the SK597-AT4 eLift or SK1265-AT6 eLift full electric by a grid connection between 11A and 32A which can be pre-set at the display, so there still can be energy left for other equipment on site.
PowerPack® battery technology
The PowerPack® battery technology absorbs the peaks in energy usage and will be charged when energy requirement for the crane is low.
Free of noise & emission
Operate the eLift crane completely free of noise while operating in ‘electric mode’. Especially during city jobs and night jobs it’s a great advantage to work noise- and emission free.
의 장점
Truckcabine
One job, one man
Steel pads
Setup in 8 minuten